RGF Heavy Duty Relay

Features

RGF Power Relay is a top mounted quick connect relay with a locating slot for DIN rail mounting. It is made of corrosion-resistant material and comes with a finger guard. The relays in RGF power relays are typically used to switch large currents or voltages with minimal power loss. The relay is RoHS compliant and has a safety module monitor.

Download Request A Quote

RGF Power Relay Details

Available in 1 pole 30A or 2 pole 25A / 40A.
Top-mounted 1/4” quick-connect terminals.
Locating slot for DIN rail mounting.
With finger protection cover.
Conformity with RoHS Directive.
Equipped with a safety module monitor.

RGF power relay consists of a Relay and socket. The control voltage range can be extended using a matching socket. It can be used with the following types of sockets: STB08-E socket, STB11-E socket and STB14-E socket.

Characteristics

Contact	Conﬁguration		1A	2A	2A-S
	Load	Resistance	30A 277VAC/30VDC	25A 277VAC/30VDC	40A 250VAC/30VDC
		Motor load	1.5HP, 120VAC; 3HP, 240VAC
	Max. switching capacity (resistive)		8310VA, 900W	6925VA, 750W	10000VA, 1200W
	Initial contact resistance		≤50mΩ
	Auxiliary module	Configuration	1CO
		Load(Resistive)	250VAC,3A
		Switching capacity(resistive)	750VA
		Contact resistance	≤50mΩ
	Material		Ag alloy
	Electrical durability		≥105Cycles (1800 Ops/h)		≥5×10 4 Cycles (360 Ops/h)
	Mechanical durability		≥5000 x 104 Cycles (1800 Ops/h)
Pick-up voltage (23℃) (Rated voltage)			DC:≤80% , AC:≤80% 50/60Hz
Drop-out voltage (23℃) (Rated voltage)			DC:≥15% , AC:≥15% 50/60Hz
Maximum voltage (23℃) (Rated voltage)			110%
Insulation resistance			≥1000MΩ (500VDC)
Coil operating power	DC (W)		approx. 1.9
	AC (VA)		approx. 2.5
Operate time&Release time (at nominal voltage)			≤30ms
Initial breakdown voltage	Between open contacts		2000VAC/1min (leakage current 1mA)
	Between poles		2000VAC/1min (leakage current 1mA)
	Between contacts and coil		4000VAC/1min (leakage current 1mA)
Insulation characteristics IEC 60664 UL840	Rated voltage		277VAC
	Pollution level		3
	Overvoltage level		III
Impulse withstand voltage (waveform: 1.2/50us)			6000V
Protection level			IP50
Storage temperature/ humidity			-55~+85℃/ ≤85%RH (18 months)
Working temperature/ humidity			-25~+55℃/ 5%~85%RH (No condensation)
Air pressure			86~106KPa
Shock resistance			10G (half-sine shock pulse: 11ms)
Vibration resistance			10~55Hz double-amplitude:1.5mm
Mounting			plug in type; screw type; PCB type; DIN rail mounting type
Unit weight			plug in type about 90g; screw type around 120g; screw type +DIN rail mountingwith auxiliary module about 135g

Coil Speciﬁcations (23℃)

Nominal voltage V.DC	6	12	24	48	110	220	/	/
Coil resistance Ω	18.9	75	303	1220	6360	25474	/	/
Nominal voltage V.AC	6	12	24	48	100-120	200-240	380	400
Coil resistance Ω	14	55	275	1100	5200	21000	62650	62650
Remarks: Coil resistance: under coil voltage 110V are measured with tolerance of ±10%Ω, above 110V with tolerance of ±15%Ω.