MRFC1 Series Relay Module

Caratteristiche

It is used for PLC output load current amplification and isolation protection. It is installed in the digital output terminal of PLC, MCU industrial control board, time relay, button and other controllers. It amplifies the output current of the output terminal for high-power equipment and weak current control. In such occasions, to protect the control system core is not destroyed.

Richiedi un preventivo

Ordering Information：

MRFC 1 08 024

Relay Module：MRFC

Relay contact form：1
1: 1C/O (change over)

Relay digits：08
2 ~ 32 (even)

Coil voltage：024
005: 5VDC
012: 12VDC
024: 24VDC

Characteristics:

Built-in RNC1CO series relay, load capacity 12A 250VAC (RES.), 12A 30VDC (RES.)，It conforms to QC、CE、TUV、UL

Input mode: terminal block input, NPN and PNP are general purpose, AC and DC are general purpose

Output form: 1 NO, 1 NC (single pole double throw)

The input has separate LED action indicators for each group

35mm type U、type E Industrial dinrail quick Module

Conforms to ROHS

Technical Parameters (MRFC1 Series):

Input (Coil)
Norminal input voltage	DC 5V/DC12V/DC 24V
Norminal current	110mA/48mA/26mA
Minimum start voltage	DC:≤75%;AC:≤80%
Drop-out voltage	DC:≥10%;AC:≥30%
Start time	≤20 ms
Drop-out time	≤10ms
Output (Contact)
Contact structure	1NC-1NO /SPDT (Single pole double throw)
Resistive Load	8A / 250 VAC, 30 VDC
Motor Load	1/3HP,240VAC
Minimum applicable load	5VDC/100mA
Electrical durability	≥6 x 10⁴times (1800 Ops/h)
Mechanical durabilty	≥2000 x 10⁴ times (1800 Ops/h)
Materiale	Lega di Ag
General Data
Power per group	DC about 0.6W; AC about 1W
Action display	LED display
Ambient tempreture	-40～+55℃(No icing)
Ambient humidity	5～85%RH (No condensation)
Terminal wiring specification	0.2～2.5mm²(26～12WG)
Stripping length	6～8mm