REH Power Relay

Karakteristike

REH power relays are essential components in any electrical system. With a lockable test button and inspection window, coils are easily identified by the test button color (AC red/DC blue). Our relays are designed for maximum performance and reliability and offer a wide range of functions, making them ideal for any Perfect choice for application.

Preuzmi Zatražite ponudu

REH Power Relay Details

Available in 2 poles and 3 poles with contact load 16A.
With non-polarity LED integrated into the relay.
Equipped with a lockable test button and inspection window.
Identification of coils through test button color.
Conformity with RoHS Directive.

REH Power Relay

REH power relay consists of a relay and socket. The control voltage range can be extended using a matching socket. It can be used with the following types of sockets: SEB11-E REH socket and SEB11-P REH socket.

REH Power Relay Characteristics

Kontakt	Conﬁguration		2C,3C
	Load	Otpor	16A/300VAC 30VDC
		Motor load	1/2HP, 120VAC;1HP,240VAC
	Max. switching capacity (resistive)		4800VA, 480W
	Initial contact resistance		≤50mΩ
	Materijal		Ag legura
	Electric durability(110%rated voltage, 55℃)		≥60 x 10⁴Cycles (600 Ops/h)
	Electric durability (Normal temperature)		≥5000 x 10⁴Cycles (18000 Ops/h)
	Mechanical durability		≥2000 x 10⁴ (18000 Ops/h)
Pick-up voltage (23℃) (Rated voltage)			DC:≤75% (rated voltage), AC:≤80% 50/60Hz (rated voltage)
Drop-out voltage (23℃) (Rated voltage)			DC:≥10% (rated voltage),AC:≥30% 50/60Hz (rated voltage)
Maximum voltage (23℃) (Rated voltage)			110%
Insulation resistance			≥1000MΩ (500VDC)
Coil operating power	DC (W)		approx. 1.5
	AC (VA)		approx. 2.5
Operate time&Release time (at nominal voltage)			≤20ms
Initial breakdown voltage	Between open contacts		1500VAC/1min (leakage current 1mA)
	Between poles		4000VAC/1min (leakage current 1mA)
	Between contacts and coil		4000VAC/1min (leakage current 1mA)
Insulation characteristics IEC 60664 UL840	Rated voltage		300VAC
	Pollution level		3
	Overvoltage level		III
Impulse withstand voltage (waveform: 1.2/50us)			6000V
Protection level			IP50
Storage temperature/ humidity			-55~+85℃/ ≤85%RH (18 months)
Working temperature/ humidity			-55~+70℃/ 5%~85%RH (No condensation) ★
Air pressure			86~106KPa
Shock resistance			10G (half-sine shock pulse: 11ms)
Vibration resistance			10~55Hz double-amplitude:1.0mm
Mounting			Plug in
Jedinična težina			Approx. 90g

Coil Specifications (23℃)

Nominal volta e V DC	6	12	24	48	110	220	/
Coil resistance Ω	24	96	385	1540	8070	32270	/
Nominal voltage V.AC	6	24	48	115	230	380	400
Coil resistance Ω	8	100	350	2200	8000	26000	27000
Remark: Coil resistance, under coil voltage 110V, is measured with a tolerance of ±10%Ω, and above 110V with a tolerance of ±15%Ω.