1.In addition to UP and Down models, a reversible(Up-Down)counter is also available.
2.Maximum counting speed of 1000cps, never before attained by a small-size preset counter. Models with memory backup function against power failure available.
3.Power supply freely selectable within a range of 100 to 240VAC.
4.Also, power supply for the DC-operated models is selectable within a range of 12 to 48 V.
5.This product has passed CP certification.
Request A Quote1. Classification by working principle
According to different working principles, time relays can be divided into air damping time relays, electric time relays, electromagnetic time relays, electronic time relays and so on.
(1) The air damping time relay uses the principle of damping when the air passes through the small hole to obtain the time delay. Its structure consists of three parts: electromagnetic system, delay mechanism and contact. The electromagnetic mechanism is a double-port direct-acting type, the contact system is a micro switch, and the delay mechanism adopts an airbag damper.
(2) Electronic time relay
The electronic time relay is based on the principle that the capacitor voltage in the RC circuit cannot jump, but can only change gradually according to the exponential law, that is, the resistance characteristics of the resistance can obtain the delay.
Features: Wide delay range, up to 3600 S, high accuracy, generally about 5%, small size, shock resistance and easy adjustment.
(3) Motor type time relay
The motor-type time relay uses a miniature synchronous motor to drive the reduction gear train to obtain a delay.
Features: The delay range is wide, up to 72 hours, and the delay accuracy can reach 1%. At the same time, the delay value is not affected by voltage fluctuations and environmental temperature changes.
The delay range and accuracy of motor-type time relays are unmatched by other time relays. Its disadvantages are complex structure, large volume, low life, and expensive, and the accuracy is affected by the frequency of the power supply.
(4) Electromagnetic time relay. The electromagnetic time relay is made by using the principle of slow attenuation of the magnetic flux after the electromagnetic coil is de-energized to delay the release of the armature of the magnetic system to obtain the delayed action principle of the contact. Its characteristic is that the contact capacity is large, so it is controlled. The capacity is large, but the delay time range is small. The accuracy is slightly worse, mainly used in the control of DC circuits
Ordering Information |
1: How about the quality of the product?
A: Accordance with international standards.
2: How about the price of the product?
A: We are the manufacturer and we have a fairly advantaged competitive price
3: Can we get the sample? Is it free?
A: We provide a few samples free by courier, but you need to pay the express.
4: What ls your dellvery tlme?
A: What ls your warranty tlme of the products?
Automotive micro relay appliance
Models | TMC7-QL | TMC7-QH | TMC7-YL | TMC7-YH | |
Supply Voltage | AC100-240V 50/60HZ DC12-48V(contains 20% ripple Max.) | ||||
Operating voltage range | 85-110% of the rated voltage | ||||
Power consumption | Approx.4W(AC 240V 50Hz),4W(DC48V) | ||||
CP1, CP2 Max Counting Speed | 30 cps: (contact and transistor inputs) Min. pulse width:16.7 ms (ON/OFF ratio:1:1) | ||||
1K cps(transistor inputs) Min pulse width:0.5 ms (ON/OFF ratio:1:1) | |||||
Reset System | Power-OFF reset: Reset time 0.5s, Reset time following power application 0.05s External reset & manual reset: Rest time 0.02s, Reset time following signal application: 0.05s. |
||||
Signal Input | Count and Reset | ||||
Input methods | Contact | ||||
Impedance by short-circuiting contacts: 1kQ Max Residual voltage: 2V Max impedance by opening contacts: 100kQ min |
|||||
Control Output | 5A 250VAC COSD=1 SPDT(1C) | ||||
Operating Mode | Up-counting | Down-counting | |||
Display | 7-segment LEDs | ||||
Ambient Temperature | -10°C-55°C | ||||
Storage Ambient Temperature | -25°C-65°C | ||||
Ambient Humidity | 35-85%RH | ||||
Insulation Resistance | 100MQ(DC500V) | ||||
Dielectric Strength | 2000VAC, 50/60Hz for 1 min(between current-carrying terminal and exposed noncurrent carrying metal parts and between no-continuous contacts) | ||||
Static Immunity | Malfunction 8kv | ||||
Impulse Withstand Voltage | 6kv(between power terminals) | ||||
6kv (between the current-carrying terminal and exposed non-current-carrying metal parts) | |||||
Vibration resistance | Destruction | 10-55Hz,0.75mm single amplitude | |||
Malfunction | 10-55Hz, 0.5mm single amplitude | ||||
Shock resistance | Destruction | 20G | |||
Malfunction | 10G | ||||
Ambient temperature | -10ºC ~ 55ºC | ||||
Ambient humidity | 35% ~ 85%RH | ||||
Life expectancy | Mechanical | 10 million operations min. | |||
Electrical | 100,000 operations min. | ||||
Protection grade | TEC: IP40(only for panel) | ||||
Weight | approx. 60g |