RGF Heavy Duty Relay

Caratteristiche

RGF Power Relay is a top mounted quick connect relay with a locating slot for DIN rail mounting. It is made of corrosion-resistant material and comes with a finger guard. The relays in RGF power relays are typically used to switch large currents or voltages with minimal power loss. The relay is RoHS compliant and has a safety module monitor.

Scaricamento Richiedi un preventivo

RGF Power Relay Details

Available in 1 pole 30A or 2 pole 25A / 40A.
Top-mounted 1/4” quick-connect terminals.
Locating slot for DIN rail mounting.
With finger protection cover.
Conformity with RoHS Directive.
Equipped with a safety module monitor.

RGF power relay consists of a Relay and socket. The control voltage range can be extended using a matching socket. It can be used with the following types of sockets: STB08-E socket, STB11-E socket and STB14-E socket.

Caratteristiche

Contatto	Configurazione		1A	2A	2A-S
	Carico	Resistenza	30A 277VAC/30VDC	25A 277VAC/30VDC	40A 250VAC/30VDC
		Motor load	1.5HP, 120VAC; 3HP, 240VAC
	Max. switching capacity (resistive)		8310VA, 900W	6925VA, 750W	10000VA, 1200W
	Resistenza di contatto iniziale		≤50 mΩ
	Auxiliary module	Configuration	1CO
		Load(Resistive)	250VAC,3A
		Switching capacity(resistive)	750VA
		Contact resistance	≤50 mΩ
	Materiale		Lega di Ag
	Electrical durability		≥105Cycles (1800 Ops/h)		≥5×10 4 Cycles (360 Ops/h)
	Durabilità meccanica		≥5000 x 104 Cycles (1800 Ops/h)
Tensione di intervento (23℃) (Tensione nominale)			DC:≤80% , AC:≤80% 50/60Hz
Tensione di caduta (23℃) (Tensione nominale)			DC:≥15% , AC:≥15% 50/60Hz
Voltaggio massimo (23℃) (Tensione nominale)			110%
Resistenza di isolamento			≥1000 MΩ (500 VCC)
Potenza operativa della bobina	CC (W)		approx. 1.9
	CA (VA)		ca. 2.5
Operate time&Release time (at nominal voltage)			≤30ms
Tensione di rottura iniziale	Tra contatti aperti		2000VAC/1min (leakage current 1mA)
	Tra i poli		2000VAC/1min (leakage current 1mA)
	Tra contatti e bobina		4000 V CA/1 min (corrente di dispersione 1 mA)
Isolamento caratteristiche CEI 60664UL840	Tensione nominale		277VAC
	Livello di inquinamento		3
	Livello di sovratensione		III
Impulse withstand voltage (waveform: 1.2/50us)			6000V
Livello di protezione			IP50
Temperatura/umidità di conservazione			-55~+85℃/ ≤85%RH (18 months)
Temperatura/umidità di lavoro			-25~+55℃/ 5%~85%RH (No condensation)
Pressione dell'aria			86~106KPa
Resistenza agli urti			10G (impulso d'urto semisinusoidale: 11 ms)
Resistenza alle vibrazioni			10~55Hz double-amplitude:1.5mm
Montaggio			plug in type; screw type; PCB type; DIN rail mounting type
Peso unitario			plug in type about 90g; screw type around 120g; screw type +DIN rail mountingwith auxiliary module about 135g

Coil Speciﬁcations (23℃)

Tensione nominale V.CC	6	12	24	48	110	220	/	/
Resistenza della bobina Ω	18.9	75	303	1220	6360	25474	/	/
Nominal voltage V.AC	6	12	24	48	100-120	200-240	380	400
Resistenza della bobina Ω	14	55	275	1100	5200	21000	62650	62650
Remarks: Coil resistance: under coil voltage 110V are measured with tolerance of ±10%Ω, above 110V with tolerance of ±15%Ω.